- Your cart is empty
- Continue Shopping
Mobile 020 7605605
Product Range
- Bright mild steel shafts
- Cold-drawn mild steel shafts
- Mild steel plates
- EN 9 shafts
- Tool steel
- Brass
- Zinc ingots
- Grade 304 stainless steel rods
- Grade 304 stainless steel sheets (2B finish)
- Grade 201 stainless steel sheets (hairline finish)
- Aluminium plain sheets
- Refractory bricks
- Refractory cement
- Wire drawing powder
- Lead ingots
- D2 Tool Steel Round and flat bars
Pictures and Description
EN 9 SHAFTS
| DIAMETER IN mm | 25 | 32 | 40 | 50 |
Alloyed medium carbon steel. Its hardness is in the range of 180 – 230 HB. It is suitable for applications which require strength and wear resistance.
BRIGHT MILD STEEL SHAFTS
Good for use where tolerance is a major factor. Has greater tolerance and accuracy in shape and straightness.
| DIA
IN mm |
½’’ | ¾’’ | 5/8’’ | 7/8’’ | 1’’ | 1 ¼’’ | 1 ½’’ | 1¾’’ | 2’’ | 2 ½’’ | 3’’ |
STAINLESS STEEL RODS GRADE 304
| DIA IN mm | 3.5 | 4 | 6 | 8 | 10 |
Good corrosion resistance and heat resisting properties.
Extremely tough and ductile and readily fabricated by cold working
G201 STAINLESS STEEL SHEETS –HAIRLINE FINISH
T
| SIZE | THICKNESS
mm |
| 8’ ×4’ | 1.0 |
| 8’ ×4’ | 1.2 |
| 8’ ×4’ | 1.5 |
G304 STAINLESS STEEL SHEETS 2B FINISH
-
SIZE THICKNESS mm 8’ ×4’ 1.0 8’ ×4’ 1.2 8’ ×4’ 1.5 8’ ×4’ 3.0
Type 304 Stainless Steel has deep drawing and excellent welding characteristics – it is easy to clean, easy to fabricate, and aesthetically pleasing to the eye. It’s commonly used to make chemical and food processing vessels, boilers and tanks.
MILD STEEL PLATES
Its made of low carbon steel.It’s used for structural, mechanical and general engineering purpose.
| SIZE mm |
| 8’ x 4’ x 10 |
| 8’ x 4’ x 16 |
| 8’ x 4’ x 25 |
ALUMINIUM SHEETS (AA 1050 H14)
1050 is popular grade of aluminium of moderate strength for general sheet metal work.
It has excellent corrosion resistance, high ductility and highly reflective
| Size | Thickness
mm |
| 8’x4’ | 0.5 |
| 8’x4’ | 0.7 |
| 8’x4’ | 1.0 |
| 8’x4’ | 1.2 |
| 8’x4’ | 1.5 |
| 8’x4’ | 2.0 |
| 8’x4’ | 3.0 |
D2 TOOL STEEL
It is a versatile high-carbon, high-chromium tool steel with highly attainable hardness. D2 provides an effective combination of wear resistance, toughness and tool performance . Available as round bars and flat bars.
| Round Bar Dia in mm | 16 | 20 | 25 | 40 | 50 | 65 | 80 |
| FLAT BAR SIZE |
| 65mmx20mm
105mmx20mm 105mmx32mm 105mmx40mm |
BRASS
Used in Low friction and corrosion resistance applications such as locks, hinges, gears, bearings, plumbing, hose couplings.
| DIA
(inches) |
½’’ | ¾’’ | 5/8’’ | 7/8’’ | 1’’ | 1 ¼’’ | 1 ½’’ | 1¾’’ | 2’’ | 2 ¼’ | 2 ½’’ | 3’’ |
WIRE DRAWING POWDER
It is a lubricant used in wire drawing process. This dry powder is suitable for drawing mild steel wire rod from 10mm to 1.0mm.